Description
HDMI extender over twisted pair is used to connect a computer, player, or other control device to a display device. This extender allows you to transmit a signal without loss of quality over a distance of up to 60 m.
HDMI extender consists of two blocks - TX and RX. To connect the blocks together, you need to use a shielded twisted pair cable CAT-5e/6 straight crimp (the same on both sides) with shielded RJ45 connectors. There are two RJ45 connectors on the side of the blocks for connecting the twisted pair cable (the connectors are labeled with the numbers "1" and "2"). These connectors are designed to transmit the signal and to exchange "service" data between devices.
One block (TX - TRANSMITTER - transmitter) is installed near the control device. Accordingly, the second block (RX - RECEIVER - receiver) is installed near the display device.
To connect to the corresponding devices, it is equipped with an HDMI ("female") type "A" connector, i.e., you will need additional HDMI-HDMI male-to-male cables to connect.
To operate this HDMI extender, additional power is required, the power supply is included.
supported resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p (50/60 Hz);
bandwidth: 165 MHz;
maximum data transfer rate: 4.95 Gbps (1.65 Gbps per channel);
supported color depth: 8 bits/channel (24 bits for all channels);
HDCP technology support;
audio support: LPCM, DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD);
maximum data transmission distance: up to 60 m;
cable used for signal transmission: copper twisted pair cable CAT-5e/6 straight crimp (the same on both sides) with shielded RJ45 connectors;
connectors: HDMI female, LAN 8P8C;
body material: metal;
color black;
additional power supply: 5V, 1A, power supply included 1 pc