Description
HDMI extender over twisted pair is used to connect a computer, player, or other control device to a display device. This extender allows you to transmit a signal without loss of quality over a distance of up to 30 m.
HDMI extender consists of two blocks - TX and RX. To connect the blocks to each other, you need to use a shielded twisted pair cable CAT-5e/6 straight crimp (the same on both sides) with shielded RJ45 connectors. There are two RJ45 connectors on the side of the blocks for connecting the twisted pair cable (the connectors are labeled with the numbers "1" and "2"). These connectors are designed to transmit the signal and to exchange "service" data between devices.
One block (TX - TRANSMITTER - transmitter) is installed near the control device. Accordingly, the second block (RX - RECEIVER - receiver) is installed near the display device.
To connect the blocks to their devices, there is an HDMI ("male") type "A" connector.
No additional power is required to operate this HDMI extender.
Supported resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p (50/60 Hz);
bandwidth: 165 MHz;
maximum data transfer rate: 4.95 Gbps (1.65 Gbps per channel);
supported color depth: 8 bits/channel (24 bits for all channels);
support for HDCP technology;
supported audio: LPCM, DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD);
maximum data transmission distance: up to 30 m;
copper twisted pair cable CAT-5e/6 straight crimp (the same on both sides) with shielded RJ45 connectors used for signal transmission;
weight of the supply kit: 47 g;
body material: plastic;
color: blue;
additional power: not required.